Sylvania SGPD432 GPS Receiver מדריך למשתמש

Sylvania SGPD432 GPS Receiver מדריך למשתמש עבור התקן

Sylvania SGPD432 GPS Receiver מדריך למשתמש

תמציות של תוכן

תוכן סיכום בדף לא. 1

Please read this manual before you start using this device ...............................................................2General tips for GPS application.......................................................................................................2Function introduction........................................................................................................................7Video Playback ....................................................................................

תוכן סיכום בדף לא. 2

Please read this manual before you start using this deviceThanks for purchasing our product. Please read this manual carefully before starting touse this device. When you use this device, you are supposed to learn well of this product.The information in this manual has been verified for its accuracy. But no liability will beapplied for the correctness of mapping data of navigation, technical and/or editorialinterpretation or illustration, or the printing and translation of this manual, nor liabl

תוכן סיכום בדף לא. 3

satellites when you are in different places, this is called "Satellite Path", a "Satellite Path"only covers a range of 300 KM. If a "Satellite Path" is defined at place A, then turn off thedevice and move to another place beyond 300 KM away from A, the device is underanother "Satellite Path", At this moment, the device needs to search for satellite signalagain. To track the new "Satellite Path", this will take quite a long time. To save time forthis searching, you may click "GPS Reset" button in

תוכן סיכום בדף לא. 4

Warnings:Please install the device in a right way to avoid driver's sight and airbag to be hindered.Any loss or damage of product, passengers, or other property caused by mistakes ofmounting or installing of the device will be not covered within the warranty and not be theresponsibility of the manufacturer.Please do not put on earphone and operate the device when you drive or ride a bike toensure your safety.Please consult with airline crew for application of the device if you want to use it dur

תוכן סיכום בדף לא. 5

Appearance and Port Description:Accessories:Car chargerUSB CableBracketCradleUser ManualWarranty cardMap instructionsIllustrations on screen display:System UI(Projector Screen)Under this UI, click icon down the screen to enter the function page. Then there will beLooped playback of cartoon, click it to entry this function. If you click the icons beside thefunction icon you can enjoy the cartoons.Secondary UI(Projector Screen)5

תוכן סיכום בדף לא. 6

In this interface, click the icons on the screen to enter the corresponding functions; andclick the arrow on the right bottom to turn the page. There will be an animation effect whenturning the page.Battery Status Icon:Full======================================================>DrainedWhen the battery is at low power level, please charge itdevice work normally.immediately to ensure theCharging:Warnings for charging:1. A new battery may be empty and not charged before you get the device.2. To achi

תוכן סיכום בדף לא. 7

When you use car charger, please start car engine first, then connect it to the device toavoid possible damage to the device due to overloaded pulse current during ignition.Please pull it out when you stop the engine, and plug it in again after next ignition.Power On the deviceIn power off status, please press the power buttondevice, then the OSD will be displayed on screen.for a while to turn on theSleeping & Power –offon the device for 3-5 seconds thenIn power-on mode, press the power button

תוכן סיכום בדף לא. 8

Video PlaybackThis feature is for video file playing, with the formats: AVI, MPEG, MPG, ASX, ,ASF andWMV.Operation:On system main menu, clickicon to enter into Video Playback application. Display ofUI for file selection:On this UI, clickicon to search video files not listed in the appointed video fileicon to close and exit from Video Playback application; Double click orfolder; Clickselect then clickicon to open and play this file.UI and button definition:PlayPauseStopNextPreviousFull screen dis

תוכן סיכום בדף לא. 9

few minutes to search files when video play mode starts if this application has not beenused for a long time.Music PlaybackThis is for Music Playback with format of MP3, WMA, WAV.icon to play music. Screen displayOperation:On system main menu, clickisshown as the illustration below:On this UI, clickicon to search for music files not in selected folder; clickiconto close this window and exit music play mode; double click, or select then clickicon to play this music file. Music play mode is disp

תוכן סיכום בדף לא. 10

Picture DisplayThis is for Photo Display with format JPG, BMP and GIF stored in NandFlash or TF card.Operation:On system main menu, clickicon to enter into Picture Display function. Display of UIfor file selection:On this UI, clickfolder; clickicon to close current UI and exit Picture Display function; double click oricon to open or play this file. Display shown as the right illustration:select then clickThen, clickicon to search photo files not listed in the appointed picture fileoricon to sele

תוכן סיכום בדף לא. 11

eBook ReadingThis if for eBook Reading with format .txt stored in NandFlash or TF card.Operation:On system main menu, clickicon to enter into eBook Reading application.Display of UI for file selection:On this menu, clickicon to search for txt files not in selected folder; clickiconto close this window and exit file reading mode; double click icon, or select then clickicon to open this file.The screen display is shown as follows:Clickoricon to turn page up or down; “Manual/Automatic” is set f

תוכן סיכום בדף לא. 12

In eBook Reading mode, click righticon to enter into bookmark setting, display ofdialogueblock is shown as in the illustration below:Clickicon to set a bookmark for the current page. Directly click selected bookmarkstored in the dialogueblock to remove this bookmark; clickbookmarked page. Clickicon to jump to theicon to exit bookmark setting and return back to eBookReading mode.Jump to the appointed pageThis is for jumping to the appointed page when reading a voluminous article and nobookmark is

תוכן סיכום בדף לא. 13

In system setting, there10 items for setting, click directly each item to change setting for it.Details will be described one by one below.Language SettingThis is for setting of system language, screen display is shown as the illustration below:Click the icons of the corresponding language in this interface or choose the interfaceproject, the system will save the setup automatically when the setup is closed, and returnto the previous menu. (The system will be required to restart after the interf

תוכן סיכום בדף לא. 14

disabled. After setting, close the current window to save.Power ManagementThis is for setting power saving mode, and adjusting time to start power saving when nooperation on the device.In drag menu to select time, select “No” for disabling this feature. After setting, close thecurrent window to save.Sound SettingThis is for setting Startup Sound, button operation on screen, and total volume. Afterentering into this UI, screen display is shown as the illustration below:lick “Screen sound”

תוכן סיכום בדף לא. 15

"NandFlash" is the inside memory of the device, "SDMMC" is the TF card. So the start-upmusic can be selected from both of them. Select one, click the button iconconfirm, then back to the upper-level interface.toTime SettingThis is for setting time of the system. After entering into this UI, screen display is shown asthe illustration below:On this UI, click icon on the screen to set. After setting, close the current window to save.System ResourcesThis is for checking system resources:On this UI,

תוכן סיכום בדף לא. 16

On this UI, use stylus to tap at the center of the cross, then tap on other crosses which willmove after each tapping until finish.Update LogoThe function is for updating start-up logo of the device. Please be sure that you havestored the Logo pictures into the TF card. After entering into this UI you will see theinterface shown below :If there is no logo file in the current TF card, please copy the logo file into it or changeanother TF card having upgrade file, then clickDuring upgrade operatio

תוכן סיכום בדף לא. 17

GPS PathUsing this function is to set GPS path for your navigation. Screen display will show asfollows:Files listed on the present screen belong to the saved ones in TF card, so click them canread the file.File folders of TF card will be listed on screen. Click a folder to open it. Select GPSSoftware If there are two or more maps from different companies on an TF card, then thisfeature can help you select each of them easily. The way to Select: :In TF card directory,open the file folder to find

תוכן סיכום בדף לא. 18

Clickicon on the upper right corner to return to GPS path interface..FLASH formatting functions:In the path setup interface, as shown:Click the icon, enter the format: interface, as shown:Select the desired formatting and click icon format, as shown:Warm remindThe machine can not use a computer format, you can use the tools inside the machine format,methods of operation: Please select the system configuration / GPS path / formatting functionality mode,you can confirmUSBThis is to set the mode wh

תוכן סיכום בדף לא. 19

Click the desired connection mode and close the window to save the chosen mode.How to save and allocate files in TF card:Usually, the files used by the device are saved in the appointed folders to ensure theaccess for embedded program of the device. You may save files into other folders orunder root directory of the TF card. If the files are saved in the appointed folders, whenopening the corresponding application, these files can be seen directly; If not in the folders,then you can not see them

השאירו תגובה